How to Install Fabric Acoustic Panels

How to install Fabric Acoustic Panels
1: Flat installation method. The "^"-shaped aluminum alloy dragon skeleton is used to support, first fix the keel, hang it firmly and level it. Use the keel to form the skeleton, then lay the board flat on the limbs of the keel, and use the limbs of the keel to support the board. This method is simple in structure and easy to install, especially the aluminum alloy "^"-shaped keel, which is not only a supporting member, but also a sealing strip of the board seam.
2: Installation method of dark keel ceiling. This method is that on the surface of the ceiling, the keel cannot be seen, and the section of the keel has a "^" shape and a special shape. The main installation procedure is as follows: firstly hoist the keel level, slot the sound-absorbing board around, then insert the limbs of the keel into the dark groove, and support the board by the limbs.
3: Paste method.
(1) Composite flat sticking method: its structure is keel + gypsum board + sound-absorbing board. The keel can be made of a light steel keel or a light steel keel. The gypsum board is fixed on the keel, and then the back of the fabric sound-absorbing board is pasted with tape in several places, and then fixed with special paint nails.
(2) Composite insertion method. Its structure is keel + gypsum board + sound-absorbing board. The keel is fixed with the gypsum board, the tape on the back of the sound-absorbing board is pasted several points, the board is flat on the gypsum board, and the nails are fixed on the tenon of the sound-absorbing board with a nailer, and the sound-absorbing boards are connected by plug-ins to align the pattern . The paste method requires that the base layer of the gypsum board is very flat, otherwise the surface will have problems of wrong stage and unequal quality.